Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Margate
If you live in Margate and your fireplace has sat unused through the humid months, the creosote and wildlife problem is already building. We handle chimney sweep work across Margate with a full look at the flue, damper, and firebox, not just a quick brush-out. Our technicians have up to 10 years of experience, and we work from the firebox floor to the crown so nothing gets missed. Call (844) 834-5492 to book a sweep.
Why Margate Homeowners Call Carrington Chimney Sweep for Chimney Sweep
Margate’s chimney work looks different from what a generic company expects. Most of the homes here were built between the 1960s and 1980s, and a large share of those chimneys were never capped. That one detail changes what a sweep actually involves.
Year-round warmth and high humidity mean a Margate chimney sits idle for most of the year. In that stretch, raccoons and squirrels treat an open flue as a den. Homeowners call us after noticing a musty odor in the living room or droppings in the firebox, often years after the last fire. We hear that pattern constantly in Margate.
We diagnose first. That means a camera look and a written report before anyone recommends a repair, so the work you pay for is the work your chimney actually needs. Sweeping, repair, and inspection run through the same company, which closes the handoff gaps that let problems slip past.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Fireplace Cleaning in Margate
Fireplace Cleaning in Margate starts with what’s actually in the chimney, and in this climate that’s usually more than soot. South Florida’s humidity keeps a fireplace damp through the off-season, so a cleaning job here involves clearing nests and debris, checking the damper for rust, and inspecting the firebox masonry for spalling before the brush ever goes up the flue. Most Margate homeowners book in fall, ahead of the brief cool season, rather than after heavy winter use. A typical fireplace cleaning in Margate runs $150 to $280, with the written estimate setting the final price.
What a Cleaning Visit Covers
We clear the firebox, brush the flue, check the damper operation, and look at the smoke chamber. If we find a nest packed against the damper, that gets removed before anything else. You get photos of what we found so you can see it yourself.
When to Book a Cleaning
Book before the first cool snap, especially if the fireplace sat unused through the summer. If you smell something musty or see droppings, don’t wait for fall. That’s a wildlife-and-moisture call, not a routine sweep.
Chimney Services in Margate
Chimney Services in Margate cover the full range from a routine annual sweep to creosote removal, soot removal, and the inspections that document what’s going on inside the flue. A standard annual sweep in Margate runs $150 to $250. A Level 1 inspection adds $100 to $200, a Level 2 with camera runs $200 to $400, and heavier creosote removal pushes the total to $300 to $600. Call (844) 834-5492 to book a sweep and get a written estimate.
Annual Sweep and Creosote Removal
A wood stove burned as a primary heat source loads creosote faster than a fireplace used a few times a season. When the glaze reaches third-degree, a standard brush won’t touch it and we move to rotary or chemical removal. That’s a different job with a different price, and we say so up front.

Inspections That Document the Chimney
Our Level 1 inspection covers the accessible parts of the chimney and firebox. A Level 2 adds a camera run through the flue, which is what you want when a home has sat unused for years or a real-estate transaction needs documentation. We hand you the findings in writing.

Trusted Brands We Service in Margate
Repairs here are finished with the same professional lines contractors specify, not hardware-store substitutes. We work with HeatShield resurfacing to restore liner integrity without a full reliner, DuraFlex liner systems when replacement is the honest answer, Gelco caps to close off an open flue, and Olympia Chimney and Famco components where they fit the job. HeatShield is the one most Margate homeowners don’t know about, and it’s often the reason a liner repair costs a fraction of a replacement. We don’t stock parts; we source what the job calls for and get it moving quickly so a chimney doesn’t sit open longer than it needs to.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Margate Homes
- Uncapped flues acting as dens. Raccoons and squirrels move into an open flue during the humid off-months, blocking draft and leaving a fire hazard for the first fire of the season. A correctly fitted Gelco cap closes that door.
- Rusted dampers from idle humidity. Subtropical air sitting in a chimney that hasn’t been used in years corrodes the damper and spalls mortar in original masonry fireplaces. A sweep that only brushes the flue misses that decay entirely.
- Third-degree creosote in wood stoves. Ranch homes using a wood stove as primary heat build glazed creosote faster than owners expect because humid air degrades the glaze between burns. That calls for rotary or chemical removal, not a standard brush.
- Original masonry past its service life. Many 1970s and 1980s fireplaces in Margate were built with mortar that has had decades of humid summers to work loose. We document what we find with photos so you can decide with evidence, not a sales pitch.
Pricing for Chimney Sweep in Margate, FL
An annual sweep in Margate typically runs $150 to $250. A Level 1 inspection is $100 to $200, a Level 2 with camera is $200 to $400, and creosote removal for a heavily loaded wood stove runs $300 to $600. What moves the number is what’s in the flue, not the square footage of the house. A capped chimney with a season of light use lands at the low end. An uncapped flue with a nest against the damper and glazed creosote above it lands higher, because the job takes longer and involves more than brushing. The estimate is free and the price is set per job in writing before we start. Nothing gets recommended without camera evidence you can see for yourself, and if the work can safely wait, we’ll tell you that too. Call (844) 834-5492 for pricing on your chimney.
We Also Serve Cities Near Margate
We take chimney sweep work in Margate and the towns around it, including Coconut Creek, North Lauderdale, Coral Springs, and Tamarac. The same humid-season problems follow the same housing stock across these lines, so the approach doesn’t change much from one town to the next. If you’re just outside Margate, call and we’ll sort out the details.
Serving Margate, FL – Our Local Coverage Area
We serve Margate and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Margate
A wood stove used as primary heat in a Margate home should be swept more often than a fireplace, and the humid off-season shortens that interval further. A fireplace burned a few times a season can go on the annual fall schedule. A stove running hard builds glazed creosote faster because damp air degrades the glaze between burns, so don’t rely on the calendar alone; check the flue and sweep when the buildup calls for it. Call (844) 834-5492 for a free estimate on a sweep.
Because most Margate flues were built without a cap, and the warm off-season leaves that opening available for months. Birds, squirrels, and raccoons treat an open chimney as a den and pack nesting material against the damper. The first fire of the season then meets a blocked flue. A Gelco cap fitted to the flue solves it. Call (844) 834-5492 to book a nest removal and cap.
Level 1 covers the accessible chimney and firebox, Level 2 adds a camera run through the flue, and Level 3 opens concealed areas when a serious defect needs a closer look. For an older ranch home that sat unused for years, Level 2 is the usual starting point because the camera shows the rust and nesting a visual check can’t. We put the findings in writing with photos. Call (844) 834-5492 for a free estimate.
No. Third-degree creosote is a hardened glaze bonded to the flue, and a standard brush passes right over it. Removal takes rotary tooling or a chemical treatment, which is why a stove chimney in Margate needs a technician who checks the flue condition before quoting a sweep. Call (844) 834-5492 to find out which method your chimney needs.
It rusts dampers, spalls mortar, and keeps the flue damp enough that mold and nesting material stay active through the off-season. A chimney that hasn’t seen a fire in years is often in worse shape than one used regularly, because nothing dries it out. That’s why the fall visit here is a wildlife-and-moisture check, not just a soot sweep. Call (844) 834-5492 for a free estimate.
Whether your Margate chimney needs a routine annual sweep, a nest removed from an uncapped flue, or a camera inspection before you light the first fire of the season, we’ll tell you what we find and what it takes to fix it. We work with HeatShield and Gelco so repairs are finished with the right materials, and we back the work. Call (844) 834-5492 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Carrington Chimney Sweep.