Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Highland Beach, FL
Chimney inspection in Highland Beach is a different job than it is a few miles inland. This barrier-island town runs almost entirely to mid- and high-rise condominiums and modern custom homes along A1A, and most of those homes heat with gas or electric fireplaces rather than wood. When we inspect here, the concern is rarely heavy creosote. It’s salt-laden air working on caps, dampers and exterior metal flues, plus wind-blown debris packed into chases that only see occasional use. If you own one of the few wood-burning masonry chimneys in Highland Beach, or a factory-built unit in an exterior chase, call (844) 834-5492 to book an inspection.
Why Highland Beach Homes Are Different
Highland Beach sits on a narrow strip of land between the Atlantic and the Intracoastal, and that geography shapes every chimney we look at. Salt spray rides in on onshore winds year-round, and it does more damage to chimney metal than most homeowners expect: cap screens rust through, damper hinges stiffen and stop sealing, and exterior flues in stucco-clad chases show corrosion long before an inland chimney would. Hurricane-season winds push sea-grape leaves and other debris into caps and flue openings, and because so many fireplaces here go unused for months at a time, that material sits and compacts instead of burning off.
Wood-burning masonry chimneys are genuinely scarce in Highland Beach. What’s common is gas and electric fireplaces, factory-built metal flues tucked into exterior chases, and stucco-over-CBS construction. That changes the inspection checklist. We spend more time on corrosion, seal integrity and pest intrusion than on creosote glaze. If you live in a condominium building, chimney and vent work often touches shared structure, so it’s worth checking your association’s rules on contractor access and approval before work is scheduled. Highland Beach building codes and any association requirements are worth confirming with the town and your board directly; we can tell you what the work involves, but the approvals are yours to line up.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Highland Beach Services
Two jobs come up most often when Highland Beach homeowners call us: a routine sweep of a flue that sees occasional use, and repair of the caps, dampers and flue components that salt air wears down first.
Chimney Sweep in Highland Beach
Sweeping a Highland Beach chimney usually means clearing what the marine climate puts there rather than scraping years of creosote. Sea-grape leaves, wind-blown grit and the occasional bird or pest nest collect in caps and flue openings, and on a fireplace used only a few times a season that debris can restrict the draft. We brush the flue, clear the firebox and smoke shelf, and check that the cap is still doing its job. For a full rundown of what the visit covers, see Chimney Sweep in Highland Beach.
Chimney Repair in Highland Beach
Repair work here leans toward corrosion and seal problems: rusted cap screens, dampers that won’t close tight, and metal flues in exterior chases showing salt damage. We diagnose first, then recommend only what the flue actually needs. Where liner damage is moderate rather than structural, resurfacing can restore function instead of a full reliner replacement, which keeps the cost down without cutting corners. We finish with correctly matched caps and components from lines like Gelco and Olympia Chimney. Details are on Chimney Repair in Highland Beach.
Chimney Inspection in Highland Beach
Chimney inspection in Highland Beach is mostly about catching salt-air corrosion and debris before either turns into a repair. In a town built largely of condominiums and modern custom homes along A1A, most flues are factory-built metal units in exterior chases or vents serving gas and electric fireplaces, and the marine climate attacks that metal faster than anything inland. A proper inspection, through our Chimney Inspection service, tells you what condition the flue, cap and damper are actually in.
Fireplace Inspection
A fireplace inspection looks at the firebox, damper and the first stretch of flue, which is where most problems on an occasionally used fireplace show up first.
Signs you need it
A damper that won’t seal, rust or crumbling in the firebox, or a smoky smell in the room when the fireplace is off all point to a fireplace inspection.
What it costs in Highland Beach
A fireplace inspection typically runs $99 – $199, and where it’s combined with a sweep a Level 1 inspection usually adds $75 – $150.
How we do it
We examine the firebox, damper and accessible flue with a camera, check the cap and chase from outside, and give you a written report with photos.
Level 2 Chimney Inspection
A Level 2 inspection goes further, using video to look the full length of the flue, which matters for factory-built units in exterior chases where corrosion hides behind the chase panels.
Signs you need it
You need a Level 2 when a property changes hands, after a chimney fire, following storm damage, or when a Level 1 turns up something the camera has to see.
What it costs in Highland Beach
A Level 2 inspection typically costs $150 – $350 in Highland Beach, with video scanning included.
How we do it
We run a camera the full length of the flue, inspect the cap, chase and all accessible components, and document what we find in photos you keep.
What Chimney Inspection Costs in Highland Beach
| Item | Typical range in Highland Beach |
|---|---|
| Level 1 inspection (with sweep) | $75 – $150 |
| Level 2 inspection with video scan | $150 – $350 |
| Fireplace inspection | $99 – $199 |
Does salt air really affect a chimney in Highland Beach?
Yes. Salt-laden onshore winds corrode caps, dampers and exterior metal flues faster here than inland, so an inspection that checks metal condition matters more than one focused only on creosote. Call (844) 834-5492 for an exact quote.
How often should a Highland Beach chimney be inspected?
Once a year is the standard, and in Highland Beach we also recommend a look after hurricane season, since wind-blown debris and salt spray do most of their damage then. Estimates are free.
Brands We Service in Highland Beach
Our repair and installation work uses professional-tier components from lines like Gelco and Olympia Chimney, and we fit caps and venting matched to the flue rather than generic aftermarket parts. We don’t claim to stock parts locally; materials are ordered for the job. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Highland Beach, FL
| Service | Typical range in Highland Beach |
|---|---|
| Level 1 inspection (with sweep) | $75 – $150 |
| Level 2 inspection with video scan | $150 – $350 |
| Fireplace inspection | $99 – $199 |
| Standard chimney sweep | $150 – $300 |
| Cap replacement | $150 – $400 |
| Damper repair | $200 – $500 |
| HeatShield liner resurfacing | $1,200 – $3,000 |
| Full reliner (DuraFlex) | $2,500 – $6,000 |
What pushes price up in Highland Beach is access and corrosion depth: scaffolding or lift work on a high-rise or a chase set back from A1A, and liners that need resurfacing rather than a simple brush-out. You get the price upfront in the written estimate before any work is booked, and that written estimate sets the final price.
Neighborhoods We Serve in Highland Beach
We work across the length of Highland Beach, from the condominium towers and low-rises along A1A to the custom homes tucked between the beach and the Intracoastal. Because the town is narrow and compact, a single response window covers the whole of it: when you book, we confirm the day and time and dispatch from 7am to 7pm, Sunday through Friday. One note on the phone line applies across the whole town: we answer 24/7. As a guide, the areas we visit most include:
- The A1A corridor and oceanfront condominiums
- Intracoastal-side homes and docks
- Custom single-family homes between the highway and the water
- Mid-rise and high-rise buildings along the beach
Service Area – Cities Near Highland Beach
Highland Beach sits between the Atlantic and the Intracoastal just south of Delray Beach, and we work the neighboring communities as well. If you’re just outside town, we cover Hypoluxo, FL, San Castle, FL, Seminole Manor, FL and Coconut Creek, FL. The same salt-air and wind-blown debris conditions apply across this stretch of coast, so the inspection checklist travels with us.
Serving Highland Beach, FL – Our Local Coverage Area
We serve Highland Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Highland Beach
We schedule around your booking and dispatch from 7am to 7pm, Sunday through Friday, and the phones are answered 24/7. Because Highland Beach is compact, the whole town falls within one window once a day is set.
Often yes for condominium buildings, where shared structure and exterior appearance are involved. Check with your association and the town before scheduling; we can tell you what the work involves so your board has the details.
Yes. We work the full length of Highland Beach and the neighboring communities listed above. Call (844) 834-5492 to confirm your address and book a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Beach Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Michelle Pruitt"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Gilbert Martinez"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Jeff Vaughn